Solid Rivets

Rivets are a permanent mechanical fastener. Before being installed a rivet consists of a smooth cylindrical shaft with a head on one end. The end opposite the head is called the buck-tail. On installation the rivet is placed in a punched or drilled hole, and the tail is upset, or bucked (i.e., deformed), so that it expands to about 1.5 times the original shaft diameter, holding the rivet in place. To distinguish between the two ends of the rivet, the original head is called the factory head and the deformed end is called the shop head or buck-tail.

Product

Rivets small enough and soft enough are often bucked.[9] In this process the installer places a rivet gun against the factory head and holds a bucking bar against the tail or a hard working surface. The bucking bar is a specially shaped solid block of metal. The rivet gun provides a series of high-impulse forces that upsets and work hardens the tail of the rivet between the work and the inertia of the bucking bar. Rivets that are large or hard may be more easily installed by squeezing instead. In this process a tool in contact with each end of the rivet clinches to deform the rivet.

Solid Rivets
Solid Rivets
Solid Rivets
Solid Rivets
Our Products  |   Quality Policy  |   Infrastructure  |   About Us  |   Contact Us  |   Site Map    

We're glad to help you. Please email or call us.
Tel.No. : +91-9922671212
Email : sales@ashokfasteners.com

Search Engine Optimisation by Prestinesoution